FTP

Description

The ftp task implements a basic FTP client that can send, receive, list, delete files, and create directories. See below for descriptions and examples of how to perform each task.

Note: This task depends on external libraries not included in the Ant distribution. See Library Dependencies for more information.

The ftp task attempts to determine what file system is in place on the FTP server. Supported server types are Unix, NT, OS2, VMS, and OS400. In addition, NT and OS400 servers which have been configured to display the directory in Unix style are also supported correctly. Otherwise, the system will default to Unix standards. remotedir must be specified in the exact syntax required by the ftp server. If the usual Unix conventions are not supported by the server, separator can be used to set the file separator that should be used instead.

See the section on directory based tasks, on how the inclusion/exclusion of files works, and how to write patterns.

This task does not currently use the proxy information set by the <setproxy> task, and cannot go through a firewall via socks.

Warning: there have been problems reported concerning the ftp get with newer attribute. Problems might be due to format of ls -l differing from what is expected by commons-net, for instance due to specificities of language used by the ftp server in the directory listing. If you encounter such a problem, please send an email including a sample directory listing coming from your ftp server (ls -l on the ftp prompt).

Parameters

Note about remotedir attribute

Parameters specified as nested elements

fileset

The ftp task supports any number of nested <fileset> elements to specify the files to be retrieved, or deleted, or listed, or whose mode you want to change.

The attribute followsymlinks of fileset is fully supported on local (put) as well as remote (get, chmod, delete) filesets. Before ant 1.6 there was no support of symbolic links in remote filesets. In order to exclude symbolic links (preserve the behavior of ant 1.5.x and older), you need to explicitly set followsymlinks to false.

Remote filesets do not support selectors.

Sending Files

The easiest way to describe how to send files is with a couple of examples:

  <ftp server="ftp.apache.org"
       userid="anonymous"
       password="
 This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
 ">
    <fileset dir="htdocs/manual"/>

  </ftp>

Logs in to ftp.apache.org as anonymous and uploads all files in the htdocs/manual directory to the default directory for that user.

  <ftp server="ftp.apache.org"

       remotedir="incoming"
       userid="anonymous"
       password="
 This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
 "
       depends="yes"
  >

    <fileset dir="htdocs/manual"/>
  </ftp>

Logs in to ftp.apache.org as anonymous and uploads all new or changed files in the htdocs/manual directory to the incoming directory relative to the default directory for anonymous.

  <ftp server="ftp.apache.org"
       port="2121"
       remotedir="/pub/incoming"
       userid="coder"
       password="java1"

       depends="yes"
       binary="no"
  >
    <fileset dir="htdocs/manual">
      <include name="**/*.html"/>

    </fileset>
  </ftp>

Logs in to ftp.apache.org at port 2121 as coder with password java1 and uploads all new or changed HTML files in the htdocs/manual directory to the /pub/incoming directory. The files are transferred in text mode. Passive mode has been switched on to send files from behind a firewall.

  <ftp server="ftp.nt.org"
       remotedir="c:\uploads"
       userid="coder"
       password="java1"

       separator="\"
       verbose="yes"

  >
    <fileset dir="htdocs/manual">
      <include name="**/*.html"/>

    </fileset>
  </ftp>

Logs in to the Windows-based ftp.nt.org as coder with password java1 and uploads all HTML files in the htdocs/manual directory to the c:\uploads directory. Progress messages are displayed as each file is uploaded.

Getting Files

Getting files from an FTP server works pretty much the same way as sending them does. The only difference is that the nested filesets use the remotedir attribute as the base directory for the files on the FTP server, and the dir attribute as the local directory to put the files into. The file structure from the FTP site is preserved on the local machine.

  <ftp action="get"
       server="ftp.apache.org"

       userid="anonymous"
       password="
 This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
 ">
    <fileset dir="htdocs/manual">
      <include name="**/*.html"/>

    </fileset>
  </ftp>

Logs in to ftp.apache.org as anonymous and recursively downloads all .html files from default directory for that user into the htdocs/manual directory on the local machine.

Deleting Files

  <ftp action="del"
       server="ftp.apache.org"
       userid="anonymous"

       password="
 This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
 ">
    <fileset>
      <include name="**/*.tmp"/>
    </fileset>
  </ftp>

Logs in to ftp.apache.org as anonymous and tries to delete all *.tmp files from the default directory for that user. If you don't have permission to delete a file, a BuildException is thrown.

Listing Files

  <ftp action="list"
       server="ftp.apache.org"

       userid="anonymous"
       password="
 This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
 " 
       listing="data/ftp.listing">
    <fileset>
      <include name="**"/>

    </fileset>
  </ftp>

This provides a file listing in data/ftp.listing of all the files on the FTP server relative to the default directory of the anonymous user. The listing is in whatever format the FTP server normally lists files.

Creating Directories

Note that with the mkdir action, the directory to create is specified using the remotedir attribute.

  <ftp action="mkdir"
       server="ftp.apache.org"
       userid="anonymous"
       password="
 This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
 " 
       remotedir="some/remote/dir"/>

This creates the directory some/remote/dir beneath the default root directory. As with all other actions, the directory separator character must be correct according to the desires of the FTP server.

Removing Directories

  <ftp action="rmdir"
       server="ftp.apache.org"

       userid="anonymous"
       password="
 This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
 " 
       remotedir="/somedir" >
    <fileset>
      <include name="dira"/>

      <include name="dirb/**"/>
    </fileset>
  </ftp>

Logs in to ftp.apache.org as anonymous and tries to remove /somedir/dira directory and all the directories tree starting at, and including, /somedir/dirb. When removing the /somedir/dirb tree, it will start at the leaves moving up to the root, so that when it tries to remove a directory it is sure all the directories under it are already removed. Obviously all the files in the tree must have been already deleted.

As an example suppose you want to delete everything contained into /somedir, so invoke first the <ftp> task with action="delete", then with action="rmdir" specifying in both cases remotedir="/somedir" and

    <fileset>
        <include name="**"/>
    </fileset>

Source: Apache Ant

 Related Tips

• I have written a module. Can I sell it?
• 2D texture font - NeHe Tutorial JOGL Port
• 3D Human Animation Applet
• 3D lens flare with occlusion testing - NeHe Tutorial JOGL Port
• 3D shapes - NeHe Tutorial JOGL Port
• A model with a light which is moved by a modeling transformation
• A Morph object to animate a shape between two key shapes
• A red sphere using the Sphere utility class